Redchilli Custom Bike Builds: A Deep Dive

At Redchilli Bikes, we say “Your Bike. Your Way.” Every Redchilli is individually specified and hand assembled in Axminster, Devon. We build one bike at a time, with the frame, fit and components chosen for the person who’ll ride it.

When you speak to David about a custom build, start with a ride you know well. Tell him where you sit up to ease the reach, where you run out of gears or where the bike feels unsettled. Those details help us choose what goes into your Redchilli before it reaches the workbench in Axminster, Devon.

A performance bike can look exceptional on a showroom floor and still be wrong for the person riding it. The reach may ask too much of your back and shoulders, the gearing may leave gaps where you need it most, or the wheels may suit smooth summer roads but feel unsettled on the lanes you ride every week. A custom build gives you the chance to make those decisions together, so the finished bike suits the roads you ride and the position you can hold.

At Redchilli, the starting point is not a list of the most expensive parts. It is a conversation about where you ride, what you want from the bike, how you currently feel on the bike you own and what you would change if you could. The finished machine should make sense as a whole, whether it is intended for fast club rides, long days in the hills, gravel routes, time trials or track racing.

Why a custom build begins with the rider

A frame is the foundation, but it is not the complete answer. Two riders can choose the same frame and need very different builds around it. One may want a responsive road bike for short, hard efforts on good surfaces. Another may cover the same distance at a steadier pace, prioritising a more relaxed position, wider tyres and gearing that makes steep Devon gradients manageable late in a ride.

Fit is central to those decisions. It influences comfort, pedalling efficiency, control and confidence, but it should not be treated as a set of isolated measurements. Saddle position, bar width, stem length, crank length and stack height all affect how a rider sits and moves on the bike. A position that looks suitably aggressive on paper may not be sustainable for four hours in the saddle. Equally, a position that is too upright for a rider’s goals can make it harder to put power down comfortably and handle the bike with assurance at speed.

There is rarely one perfect position that applies to every type of cycling. A time-trial bike has different demands from an endurance road bike, while a gravel build needs room for movement and control on changing surfaces. The aim is to arrive at a position that supports the riding you actually do, while leaving scope for sensible adjustment as fitness, flexibility or ambitions develop.

Redchilli custom bike builds: the specification process

Once the intended fit and purpose are clear, the component choices become more meaningful. This is where a custom build earns its place. Instead of accepting a factory package with one compromise after another, each element can be considered in relation to the rest.

Frame and geometry set the character

Carbon road, endurance, gravel, time-trial and track frames each bring different priorities. Geometry affects how a bike steers, how much weight sits over the front wheel, and how stable or lively it feels through corners. Tyre clearance, mounting options and frame integration also shape what is practical over the long term.

A race-oriented road frame can be a good choice for a committed sportive rider, provided the geometry allows the right position without resorting to an extreme stack of spacers or an unusually short stem. Conversely, an endurance frame is not automatically slower. For many riders, a position they can hold comfortably and confidently is more useful than an ostensibly faster frame that leaves them fatigued after two hours.

The decision also depends on the roads. Rough lanes, exposed coastal routes and frequent climbing place different demands on a bike than flat, well-surfaced circuits. A thoughtful frame choice accounts for this before the build reaches the workshop bench.

Gearing should serve the terrain and the rider

For a rider who wants one bike for fast club rides and long sportives, we’d ask where they run out of gears now. If they’re grinding up the last steep lane of a Devon loop, we’d look at giving them an easier bottom gear. If they spend most of their time in a fast group on flatter roads, we’d also consider how closely spaced the gears are where they spend most of the ride.

The right answer depends on power, cadence preference, gradients, load and riding style. A rider who enjoys high-cadence climbing may appreciate a different cassette range from someone who prefers to push a larger gear. A bike used for events in the South West may need lower gearing than one primarily used on flatter roads, even if both riders are equally strong.

Groupset choice is not simply about the number of speeds or whether shifting is electronic. Lever shape, braking feel, serviceability, chainring options and the way the system works with the chosen wheels all matter. Electronic shifting can offer clean operation and useful adjustment, but a well-set-up mechanical system remains an excellent option for many builds. What matters is that the system fits the rider’s needs and can be maintained with confidence.

Wheels and tyres define much of the ride feel

Wheels are one of the most noticeable changes a rider can make, but deeper and lighter are not universal improvements. Rim depth affects aerodynamic benefit and crosswind behaviour. Rim width affects tyre shape and support. Hub engagement and bearing quality influence the feel of the bike, while spoke count and lacing pattern have implications for durability and serviceability.

For a rider covering exposed roads, a moderate-depth wheel may offer a better balance of speed and control than a very deep section. For a heavier rider, or someone who regularly rides poor surfaces, a wheel built with appropriate strength and tyre support may be more valuable than chasing the lowest possible weight.

Tyres deserve the same attention. A wider tyre at a properly chosen pressure can improve grip, comfort and rolling efficiency on real roads. It may also make a bike feel calmer through broken tarmac and damp corners. Clearance, rim compatibility and intended use all need consideration, particularly where a bike may move between summer road rides, winter training and light gravel.

Assembly is where decisions become a bike

Even the best selection of components can disappoint if the assembly is rushed. A custom build is not just a collection of boxes brought together at the end of a purchase. The detail of how those parts are fitted has a direct effect on shifting, braking, noise, longevity and the confidence a rider feels from the first ride.

David hand assembles each individually specified Redchilli in Axminster. On a disc-brake road or gravel build, that means routing the hoses, aligning the callipers so the rotors run freely, and checking the drivetrain shifts cleanly across the cassette. He checks the fastener torques before handover.

There are trade-offs here too. Fully integrated cockpits can create a clean appearance and aerodynamic gains, but they can make future changes to stem length, bar width or hose routing more involved. A more conventional arrangement may be the better choice for a rider who expects to refine their position over time or values straightforward servicing. Neither approach is inherently superior without knowing the rider and the bike’s intended role.

The same thinking applies to finishing components. A saddle that suits one rider perfectly can be uncomfortable for another. Bar width is influenced by shoulder width, posture and the kind of terrain ridden. Crank length can affect pedalling clearance and hip comfort, particularly for riders seeking a lower or more aerodynamic position. Small decisions become significant when they shape every mile.

A bike should remain personal after handover

The handover is an important point, not the end of the relationship. A new bike often reveals useful information over its first few rides: a bar position may need a small adjustment, tyre pressures may need refining, or a rider may find that a slightly different gearing choice would better suit their regular route.

If you want to revisit the bar position or gearing after a few rides, you can speak directly to David. He knows what went into the bike and why, which gives him a starting point when you describe how it feels on your usual roads.

For riders across the UK, that personal approach can begin in the workshop or through a considered remote discussion. The essential point remains the same: the bike should reflect the rider’s proportions, plans and preferred ride feel, not the limitations of a stock specification.

A well-built custom bike should not constantly remind you of its components. It should simply feel natural beneath you: composed on the descent, efficient on the climb, comfortable enough to keep going, and precise when the road asks more of you. That is the value of building around the rider from the first conversation onwards.

Start Your Redchilli Custom Build with a Ride in Mind

Tell David about the rides you want your next bike to do well and what you’d keep or change about your current set-up. He’ll help you choose a frame and talk through the fit, gearing and wheels before building the bike for you.

Redchilli Bikes. Your Bike. Your Way.

Every Redchilli Begins with You